DM74ALS374N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 35MHz |
| Base Part Number | 74ALS374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 35MHz |
| Propagation Delay | 16 ns |
| Turn On Delay Time | 3 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 19mA |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 16ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -2.6mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS374N Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. As configured, the output uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Through Hole. It operates with a supply voltage of 4.5V~5.5V. Currently, the operating temperature is 0°C~70°C TA. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74ALS series. In order for it to function properly, its output frequency should not exceed 35MHz. In total, it contains 1 elements. As a result, it consumes 19mA of quiescent current without being affected by external factors. The object belongs to the 74ALS374 family. Electronic part Through Holeis mounted in the way. This board is designed with 20pins on it. The clock edge trigger type for this device is Positive Edge. It is designed with a number of bits of 8. The superior flexibility is achieved through the use of 8 circuits. High efficiency requires the supply voltage to be maintained at 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 24mA. There are 3 output lines on it. It is reported that there are 3 input lines. -2.6mAis set as the high level output current. In the low level output current setting, 24mAis used. The operating temperature should be lower than 70°C. If the operating temperature is higher than 0°C, the system should operate properly. It operates with the minimal supply voltage of 4.5V. 5.5Vis the maximum supply voltage supported by it. It is possible to achieve 35MHz frequencies.
DM74ALS374N Features
Tube package
74ALS series
20 pins
8 Bits
DM74ALS374N Applications
There are a lot of ON Semiconductor DM74ALS374N Flip Flops applications.
- Individual Asynchronous Resets
- Data Synchronizers
- Frequency division
- Load Control
- Event Detectors
- 2 – Bit synchronous counter
- Convert a momentary switch to a toggle switch
- Circuit Design
- Functionally equivalent to the MC10/100EL29
- Supports Live Insertion
