banner_page

DM74ALS533N

D-Type, Latch 4.5V~5.5V Tri-State Latches 74ALS Series 74ALS533 20-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-DM74ALS533N
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 882
  • Description: D-Type, Latch 4.5V~5.5V Tri-State Latches 74ALS Series 74ALS533 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALS
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Voltage - Supply 4.5V~5.5V
Base Part Number 74ALS533
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Inverting
Nominal Supply Current 26mA
Propagation Delay 19 ns
Quiescent Current 17mA
Turn On Delay Time 4 ns
Logic Function D-Type, Latch
Current - Output High, Low 2.6mA 24mA
Logic Type D-Type Transparent Latch
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 3
RoHS Status RoHS Compliant
Lead Free Lead Free

DM74ALS533N Overview


It is embedded in the 20-DIP (0.300, 7.62mm) package. Tube is the way in which it is packaged. In this configuration, the output is set to Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Electronic components are mounted using the Through Hole method. The supply voltage of the device is 4.5V~5.5V. A temperature of 0°C~70°C is set as the operating temperature. It is a type of FPGA belonging to the 74ALS series. 74ALS533 is its family. Designed with 20 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Through Hole method. An electronic circuit can be found on 8 input lines. In order to achieve high efficiency, the supply voltage should be kept at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The quiescent current consumed by it is 17mA because it is unaffected by external factors.

DM74ALS533N Features


20-DIP (0.300, 7.62mm) package
74ALS series
74ALS533 family
20 pins

DM74ALS533N Applications


There are a lot of ON Semiconductor DM74ALS533N Latches applications.

  • Lamp and Display (LED)
  • Counting
  • Counter
  • Counters
  • Shift right with parallel loading
  • Shift Registers
  • Serial Output Data Queuing
  • Stacked or Push-Down Registers
  • Instrumentation
  • Buffer Storage

Write a review

Note: HTML is not translated!
    Bad           Good