banner_page

DM74ALS563AWM

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS563 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-DM74ALS563AWM
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 407
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS563 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Supplier Device Package 20-SOIC
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALS
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ALS563
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 26mA
Number of Bits 8
Propagation Delay 18 ns
Quiescent Current 16mA
Turn On Delay Time 3 ns
Logic Function D-Type, Latch
Current - Output High, Low 2.6mA 24mA
Logic Type D-Type Transparent Latch
High Level Output Current -2.6mA
Low Level Output Current 2.6mA
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 3ns
RoHS Status RoHS Compliant
Lead Free Lead Free

DM74ALS563AWM Overview


In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. A package of Tube has been used. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. The way in which this electronic part is mounted is Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at 0°C~70°C degrees Celsius. It is a type of FPGA belonging to the 74ALS series. Electronic parts with 8 bits are designed for this application. It belongs to 74ALS563 family. It is designed with 20 pins. Surface Mount is used to mount this electronic part. There are 8 input lines in which electronic circuits are present. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The quiescent current consumed by it is 16mA because it is unaffected by external factors. The element count is 1. 8 circuits are used to achieve superior flexibility. It has been set to 2.6mA for the low level output current. -2.6mA represents the high level output current. Lower than 70°C is the ideal operating temperature. A temperature greater than 0°C should be used for operation. 5.5V is the maximum voltage it supports. With a voltage of 4.5V, it operates at its minimum capacity.

DM74ALS563AWM Features


20-SOIC (0.295, 7.50mm Width) package
74ALS series
8 Bits
74ALS563 family
20 pins
1 elements

DM74ALS563AWM Applications


There are a lot of ON Semiconductor DM74ALS563AWM Latches applications.

  • Up-Down Johnson
  • Hammer
  • Watches
  • Communication systems
  • Counter timers
  • Avionics
  • Parallel Input
  • Relay replacement
  • Counting
  • Accumulator Registers

Write a review

Note: HTML is not translated!
    Bad           Good