banner_page

DM74ALS573BN

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS573 20-DIP (0.300, 7.62mm)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-DM74ALS573BN
  • Package: 20-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 108
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74ALS Series 74ALS573 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Mount Through Hole
Mounting Type Through Hole
Package / Case 20-DIP (0.300, 7.62mm)
Number of Pins 20
Supplier Device Package 20-PDIP
Weight 4.535924g
Operating Temperature 0°C~70°C
Packaging Tube
Series 74ALS
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Termination Through Hole
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74ALS573
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 24mA
Output Current 24mA
Number of Bits 8
Propagation Delay 14 ns
Turn On Delay Time 2 ns
Logic Function D-Type, Latch
Number of Inputs 1
Current - Output High, Low 2.6mA 24mA
Logic Type D-Type Transparent Latch
Number of Gates 8
High Level Output Current -2.6mA
Low Level Output Current 2.6mA
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 2ns
Height 6.35mm
Length 6.35mm
Width 6.35mm
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

DM74ALS573BN Overview


There is an embedded version of it in package 20-DIP (0.300, 7.62mm). Packaged in the way of Tube. Tri-State is the output configured for it. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. The voltage supply is 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. The 74ALS series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. 74ALS573 is its family. The pin configuration of the device is 20. It is mounted according to the Through Hole method. There are electronic circuits attached to the 8 input lines. With 24mA, maximum design flexibility is ensured. In order to achieve high efficiency, the supply voltage should be kept at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. It consists of 1 elements. The superior flexibility of this circuit can be attributed to the use of 8 circuits. It is set to zero for the low level output current. It is set to zero for the high level output current. It is recommended that the operating temperature not exceed 70°C. The operating temperature should be higher than 0°C. Voltages up to 5.5V can be supplied. This device requires a minimum voltage of 4.5V.

DM74ALS573BN Features


20-DIP (0.300, 7.62mm) package
74ALS series
8 Bits
74ALS573 family
20 pins
1 elements

DM74ALS573BN Applications


There are a lot of ON Semiconductor DM74ALS573BN Latches applications.

  • Timers
  • Buffer/Storage Registers
  • General-Purpose Register
  • Avionics
  • Multistage ripple counting
  • Lamp and Display (LED)
  • Parallel data synchronization
  • Automatic test equipment
  • Shift right with parallel loading
  • Data acquisition

Write a review

Note: HTML is not translated!
    Bad           Good