DM74ALS573BWMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 74ALS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ALS573 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Nominal Supply Current | 24mA |
| Output Current | 24mA |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 2 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 2.34mm |
| Length | 12.8mm |
| Width | 7.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74ALS573BWMX Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). The package is in the form of Tape & Reel (TR). It uses Tri-State as the output. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. During operation, the temperature is set at 0°C~70°C. An FPGA of this type belongs to the 74ALS series. It belongs to 74ALS573 family. It is designed with 20 pins. This electronic part is mounted in the way of Surface Mount. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. With an output current of 24mA, it is highly flexible in terms of design. Optimal efficiency requires 5V as the supply voltage. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
DM74ALS573BWMX Features
20-SOIC (0.295, 7.50mm Width) package
74ALS series
74ALS573 family
20 pins
DM74ALS573BWMX Applications
There are a lot of ON Semiconductor DM74ALS573BWMX Latches applications.
- Address register
- Double bus register system
- Automotive HEV/EV Powertrain
- Parallel Input
- Hammer
- Automotive Infotainment
- Relay replacement
- Data acquisition
- A/D converters
- Counter
