DM74ALS576AN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74ALS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 30MHz |
| Family | ALS |
| Current - Quiescent (Iq) | 18mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 2.6mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 14ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
DM74ALS576AN Overview
20-DIP (0.300, 7.62mm)is the packaging method. The package Tubecontains it. The output it is configured with uses Tri-State, Inverted. The trigger it is configured with uses Positive Edge. Through Holeis positioned in the way of this electronic part. The JK flip flop operates at 4.5V~5.5Vvolts. 0°C~70°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74ALSseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 30MHz. A total of 1 elements are present. During its operation, it consumes 18mA quiescent energy. The number of terminations is 20. The power source is powered by 5V. Electronic devices of this type belong to the ALSfamily. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
DM74ALS576AN Features
Tube package
74ALS series
DM74ALS576AN Applications
There are a lot of Rochester Electronics, LLC DM74ALS576AN Flip Flops applications.
- Power down protection
- Supports Live Insertion
- Dynamic threshold performance
- Cold spare funcion
- Event Detectors
- Safety Clamp
- Single Up Count-Control Line
- ESD protection
- Count Modes
- Single Down Count-Control Line
