banner_page

DM74AS157SJ

16 Terminations4.5V~5.5V Signal switch74AS Series 1 Outputs4 Functions


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-DM74AS157SJ
  • Package: 16-SOIC (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 345
  • Description: 16 Terminations4.5V~5.5V Signal switch74AS Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Number of Inputs 2
Current - Output High, Low 2mA 20mA
Output Polarity TRUE
Propagation Delay (tpd) 6 ns
Voltage Supply Source Single Supply
Independent Circuits 1
Width 5.3mm
RoHS Status ROHS3 Compliant
Mounting Type Surface Mount
Package / Case 16-SOIC (0.209, 5.30mm Width)
Surface Mount YES
Operating Temperature 0°C~70°C
Packaging Tube
Series 74AS
JESD-609 Code e3
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Type Multiplexer
Terminal Finish MATTE TIN
Technology TTL
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 5V
Reach Compliance Code unknown
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 16
Number of Outputs 1
Qualification Status Not Qualified
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 4.5V
Family AS

DM74AS157SJ Overview


The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.209, 5.30mm Width).Tube is the packaging method.Mounting is performed using Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.By keeping the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the 74AS series, which provide extensive application potential.There is a design for terminating 16 as part of its basic configuration.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch consists of 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a family of AS members.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4.5V.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.The turn signal switch contains 1 outputs designed to operate.This multiplexer has 2 inputs.

DM74AS157SJ Features


Supplied in the 16-SOIC (0.209, 5.30mm Width) package

DM74AS157SJ Applications


There are a lot of Rochester Electronics, LLC DM74AS157SJ Signal Switches / Multiplexers / Decoders applications.

  • Combinational circuit
  • Arithmetic Logic Units
  • Medium scale TV wall
  • Speed control of medern motors
  • Paper plants
  • Microprocessor input/output systems
  • Code converters
  • Telephone network
  • Make full adder
  • Automatic Monitoring systems

Write a review

Note: HTML is not translated!
    Bad           Good