Parameters |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Surface Mount |
NO |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Series |
74AS |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
Type |
Multiplexer |
Terminal Finish |
MATTE TIN |
Technology |
TTL |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT APPLICABLE |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
NOT APPLICABLE |
Pin Count |
16 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Circuit |
4 x 2:1 |
Supply Voltage-Max (Vsup) |
5.5V |
Supply Voltage-Min (Vsup) |
4.5V |
Family |
AS |
Number of Inputs |
2 |
Output Characteristics |
3-STATE |
Current - Output High, Low |
15mA 48mA |
Output Polarity |
TRUE |
Propagation Delay (tpd) |
6 ns |
Voltage Supply Source |
Single Supply |
Independent Circuits |
1 |
Height Seated (Max) |
5.08mm |
Width |
7.62mm |
RoHS Status |
ROHS3 Compliant |
DM74AS257N Overview
In order to save board space, digital switch is located in the 16-DIP (0.300, 7.62mm).Tube represents its packaging.In terms of mounting, digital switch ic uses the Through Hole method .Multiplexer is the analog IC that the multiplexers uses.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at 0°C~70°C.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.The multiplexers from 74AS series can be used for a wide range of applications.The basic configuration of this system includes 16 terminations.For multiplexer's system, 5V voltage is supplied.A component pin count of 16 is found on this turn signal switch.The logic switch object belongs to the family of AS.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.5V.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.The turn signal switch operates with 1 outputs.The multiplexer is equipped with 2 inputs.
DM74AS257N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
DM74AS257N Applications
There are a lot of Rochester Electronics, LLC DM74AS257N Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- Robotic vehicles
- Make half adder
- Metal detectors
- Enabling different rows of memory depending on address in memory chips
- Analog to digital conversion
- PCIe
- Arithmetic Logic Units
- Memory chips
- Video transmission