banner_page

DM74AS373WM

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AS Series 74AS373 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-DM74AS373WM
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 623
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74AS Series 74AS373 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Supplier Device Package 20-SOIC
Operating Temperature 0°C~70°C
Packaging Tube
Series 74AS
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Voltage - Supply 4.5V~5.5V
Base Part Number 74AS373
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Nominal Supply Current 85mA
Number of Bits 8
Propagation Delay 6 ns
Quiescent Current 55mA
Turn On Delay Time 3.5 ns
Logic Function D-Type, Latch
Current - Output High, Low 15mA 48mA
Logic Type D-Type Transparent Latch
High Level Output Current -15mA
Low Level Output Current 15mA
Number of Input Lines 8
Independent Circuits 1
Number of Output Lines 3
Delay Time - Propagation 3.5ns
RoHS Status RoHS Compliant
Lead Free Lead Free

DM74AS373WM Overview


In the package 20-SOIC (0.295, 7.50mm Width), it can be found. Tube is the way it is packaged. It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. The supply voltage of the device is 4.5V~5.5V. It is 0°C~70°C at the operating temperature. An FPGA in this series belongs to the 74AS family. With this electronic part, there are 8 bits. This type belongs to the 74AS373 family. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the way in which this electronic part is mounted. Electronic circuits are represented by 8 input lines. The supply voltage should be maintained at 5V for high efficiency. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are no external factors that affect it, so it consumes 55mA quiescent current. 1 elements are present in it. The superior flexibility of the system is achieved through its use of 8 circuits. 15mA is set as the low level output current. -15mA is set as the high level output current. The operating temperature should be lower than 70°C. It is recommended that the operating temperature be higher than 0°C. The maximum supply voltage is 5.5V. With a voltage of 4.5V, it operates at its minimum capacity.

DM74AS373WM Features


20-SOIC (0.295, 7.50mm Width) package
74AS series
8 Bits
74AS373 family
20 pins
1 elements

DM74AS373WM Applications


There are a lot of ON Semiconductor DM74AS373WM Latches applications.

  • Synchronous frequency dividers
  • Meter applications
  • Pattern Generators
  • Shift right register
  • Automotive ADAS
  • Accumulator Registers
  • BCD counting
  • PCs and Notebooks
  • Shift left register
  • OC-48 communication systems

Write a review

Note: HTML is not translated!
    Bad           Good