DM74AS374N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 125MHz |
| Family | AS |
| Current - Quiescent (Iq) | 120mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 15mA 48mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 9 ns |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
DM74AS374N Overview
20-DIP (0.300, 7.62mm)is the way it is packaged. The package Tubecontains it. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Through Hole. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to 0°C~70°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74ASseries of FPGAs. There should be no greater frequency than 125MHzon its output. A total of 1elements are present in it. During its operation, it consumes 120mA quiescent energy. There have been 20 terminations. Power is provided by a 5V supply. ASis the family of this D flip flop. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.5V. A total of 2ports are embedded in the D flip flop.
DM74AS374N Features
Tube package
74AS series
DM74AS374N Applications
There are a lot of Rochester Electronics, LLC DM74AS374N Flip Flops applications.
- Consumer
- Data transfer
- Shift registers
- High Performance Logic for test systems
- Power down protection
- Automotive
- Parallel data storage
- Buffered Clock
- ATE
- ESCC
