DM74AS574N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Supplier Device Package | 20-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 80MHz |
| Base Part Number | 74AS574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 80MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 3 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 116mA |
| Current - Output High, Low | 15mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -15mA |
| Low Level Output Current | 48mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74AS574N Overview
It is packaged in the way of 20-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Through Holeis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. It is operating at a temperature of 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. The 74ASseries comprises this type of FPGA. It should not exceed 80MHzin its output frequency. A total of 1elements are contained within it. There is 116mA quiescent consumption. You can search similar parts based on 74AS574. Electronic part Through Holeis mounted in the way. This board is designed with 20pins on it. There is a clock edge trigger type of Positive Edgeon this device. There are 8bits in its design. Its flexibility is enhanced by 8 circuits. High efficiency requires the supply voltage to be maintained at 5V. The JK flip flop is with 3 output lines to operate. The number of input lines is 8. In this case, the high level output current is set to -15mA. 48mAis set as the low level output current. If the operating temperature is lower than 70°C, it is recommended. It is recommended that the operating temperature be greater than 0°C. The minimal supply voltage is 4.5V. There is a maximum voltage support of 5.5V. This frequency can be achieved at 80MHz.
DM74AS574N Features
Tube package
74AS series
20 pins
8 Bits
DM74AS574N Applications
There are a lot of ON Semiconductor DM74AS574N Flip Flops applications.
- Buffer registers
- Single Up Count-Control Line
- Instrumentation
- Pattern generators
- Load Control
- Memory
- Balanced 24 mA output drivers
- Asynchronous counter
- EMI reduction circuitry
- Circuit Design
