DM74AS74M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 105MHz |
| Base Part Number | 74AS74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 2 |
| Clock Frequency | 105MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 3.5 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 2mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -2mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74AS74M Overview
The package is in the form of 14-SOIC (0.154, 3.90mm Width). A package named Tubeincludes it. This output is configured with Differential. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. A voltage of 4.5V~5.5Vis required for its operation. 0°C~70°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74ASseries contain this type of chip. Its output frequency should not exceed 105MHz. A total of 2 elements are present. T flip flop consumes 16mA quiescent energy. You can search similar parts based on 74AS74. A part of the electronic system is mounted in the way of Surface Mount. A total of 14pins are provided on this board. Its clock edge trigger type is Positive Edge. 2bits are used in its design. 2 circuits are used to achieve its superior flexibility. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. There are no output lines on the JK flip flop. Currently, there are 1 input lines present. -2mAis the output current at high level. Low level output current is set to 20mA. Operating temperatures should be lower than 70°C. It is recommended that the operating temperature is higher than 0°C. The system operates with a minimum supply voltage of 4.5V. 5.5Vis the maximum supply voltage supported by it. It is possible to achieve a frequency of 105MHz.
DM74AS74M Features
Tube package
74AS series
14 pins
2 Bits
DM74AS74M Applications
There are a lot of ON Semiconductor DM74AS74M Flip Flops applications.
- Circuit Design
- Latch
- Digital electronics systems
- Event Detectors
- Instrumentation
- Frequency division
- Buffer registers
- Consumer
- Differential Individual
- ATE
