DM74AS74N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-PDIP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 105MHz |
| Base Part Number | 74AS74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 2 |
| Clock Frequency | 105MHz |
| Propagation Delay | 9 ns |
| Turn On Delay Time | 3.5 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 2mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -2mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
DM74AS74N Overview
14-DIP (0.300, 7.62mm)is the way it is packaged. There is an embedded version in the package Tube. T flip flop uses Differentialas the output. There is a trigger configured with Positive Edge. It is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. The 74ASseries comprises this type of FPGA. It should not exceed 105MHzin its output frequency. D latch consists of 2 elements. There is a consumption of 16mAof quiescent energy. The 74AS74family includes it. There is an electronic component mounted in the way of Through Hole. With its 14pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. The flip flop is designed with 2bits. The superior flexibility of this circuit is achieved by using 2 circuits. Optimal efficiency requires a supply voltage of 5V. There are 1 output lines on it. As of now, there are 1input lines. High level output current is set to -2mA. It is set to 20mAfor low level output current. It is recommended that the operating temperature be lower than 70°C. Ideally, the operating temperature should be greater than 0°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. It supports a maximum supply voltage of 5.5V volts. 105MHzis the maximum frequency that can be achieved.
DM74AS74N Features
Tube package
74AS series
14 pins
2 Bits
DM74AS74N Applications
There are a lot of ON Semiconductor DM74AS74N Flip Flops applications.
- Digital electronics systems
- Latch-up performance
- Event Detectors
- Circuit Design
- Control circuits
- Bounce elimination switch
- Pattern generators
- Data Synchronizers
- Guaranteed simultaneous switching noise level
- Clock pulse
