DM74AS874WMX
| Parameters | |
|---|---|
| Supplier Device Package | 24-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74AS |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 80MHz |
| Base Part Number | 74AS874 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 80MHz |
| Propagation Delay | 10.5 ns |
| Turn On Delay Time | 3 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 133mA |
| Current - Output High, Low | 15mA 48mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -15mA |
| Low Level Output Current | 48mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
DM74AS874WMX Overview
As a result, it is packaged as 24-SOIC (0.295, 7.50mm Width). The package Tape & Reel (TR)contains it. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of 0°C~70°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74ASseries of FPGAs. It should not exceed 80MHzin its output frequency. In total, it contains 2 elements. It consumes 133mA of quiescent current without being affected by external factors. Members of the 74AS874family make up this object. This electronic part is mounted in the way of Surface Mount. There are 24pins on it. This device has the clock edge trigger type of Positive Edge. The flip flop is designed with 8bits. Its flexibility is enhanced by 2 circuits. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 3output lines. Currently, there are 3 input lines present. It is set to -15mAfor the high level output current. Low level output current is set to 48mA. A temperature below 70°Cshould be used for operation. It is recommended that the operating temperature is higher than 0°C. It operates with the minimal supply voltage of 4.5V. It supports the maximal supply voltage of 5.5V. This frequency can be achieved 80MHz.
DM74AS874WMX Features
Tape & Reel (TR) package
74AS series
24 pins
8 Bits
DM74AS874WMX Applications
There are a lot of ON Semiconductor DM74AS874WMX Flip Flops applications.
- Storage registers
- Divide a clock signal by 2 or 4
- Automotive
- Latch-up performance
- Functionally equivalent to the MC10/100EL29
- 2 – Bit synchronous counter
- Clock pulse
- Count Modes
- Instrumentation
- Asynchronous counter
