DM74LS193N
| Parameters | |
|---|---|
| Surface Mount | NO |
| JESD-609 Code | e0 |
| Number of Terminations | 16 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | SEPARATE UP/DOWN CLOCK |
| HTS Code | 8542.39.00.01 |
| Subcategory | Counters |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Bits | 4 |
| Family | LS |
| Logic IC Type | BINARY COUNTER |
| Max I(ol) | 0.008 A |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 54 ns |
| Power Supply Current-Max (ICC) | 34mA |
| fmax-Min | 25 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 20000000Hz |
| Load/Preset Input | YES |
| Mode of Operation | SYNCHRONOUS |
| Height Seated (Max) | 5.08mm |
| Length | 19.305mm |
| Width | 7.62mm |
| RoHS Status | RoHS Compliant |
DM74LS193N Overview
16 terminations are used for its configuration. Having a voltage supply of 5Vallows it to operate in a highly flexible manner. In total, there are 16pins on the component. In this case, it belongs to the family of [0]. In this device, there is information of 4bits. In regard to this electronic device, SEPARATE UP/DOWN CLOCKare essential features. In this device, the temperature grade is COMMERCIAL. There is 5V voltage comes from the voltage source. Supply voltages can be as low as 4.75V volts (Vsup). The maximum supply voltage (Vsup) is up to 5.25V. It is part of the Countersfamily of electronic components. In this case, BINARY COUNTERrefers to the logic IC type being used. In general, the maximum operating temperature is set to 70°C.
DM74LS193N Features
SEPARATE UP/DOWN CLOCK
BINARY COUNTER as logic IC type
DM74LS193N Applications
There are a lot of Fairchild (ON Semiconductor) DM74LS193N Counters & Dividers applications.
- counting/frequency sy nthesizers-BCD output
- Fixed and programmable counters greater than 10
- ALGEBRAIC COMPUTATION
- ANALOG SIGNAL PROCESSING
- Clocks
- DIVISION
- Up Counters
- Communications Digital Frequency Synthesizers;
- Dual Up Counters
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
