Parameters |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
16-DIP (0.300, 7.62mm) |
Number of Pins |
16 |
Operating Temperature |
0°C~70°C TA |
Packaging |
Tube |
Series |
74S |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Type |
JK Type |
Voltage - Supply |
4.75V~5.25V |
Base Part Number |
74S112 |
Function |
Set(Preset) and Reset |
Output Type |
Differential |
Polarity |
Non-Inverting |
Clock Frequency |
60MHz |
Propagation Delay |
12 ns |
Turn On Delay Time |
9 ns |
Logic Function |
AND, Flip-Flop |
Current - Output High, Low |
1mA 20mA |
Number of Bits per Element |
1 |
Trigger Type |
Negative Edge |
Number of Input Lines |
2 |
Clock Edge Trigger Type |
Negative Edge |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
DM74S112N Overview
16-DIP (0.300, 7.62mm)is the packaging method. There is an embedded version in the package Tube. In the configuration, Differentialis used as the output. The trigger configured with it uses Negative Edge. Through Holeis positioned in the way of this electronic part. A voltage of 4.75V~5.25Vis used as the supply voltage. A temperature of 0°C~70°C TAis considered to be the operating temperature. It belongs to the type JK Typeof flip flops. The 74Sseries comprises this type of FPGA. You should not exceed 60MHzin its output frequency. The 74S112 family contains this object. It is mounted in the way of Through Hole. As you can see from the design, it has pins with 16. In this device, the clock edge trigger type is Negative Edge. As of now, there are 2input lines.
DM74S112N Features
Tube package
74S series
16 pins
DM74S112N Applications
There are a lot of ON Semiconductor DM74S112N Flip Flops applications.
- Cold spare funcion
- 2 – Bit synchronous counter
- Clock pulse
- Functionally equivalent to the MC10/100EL29
- Convert a momentary switch to a toggle switch
- Load Control
- Individual Asynchronous Resets
- Latch-up performance
- Reduced system switching noise
- Digital electronics systems