banner_page

DM74S158N

16 Terminations4.75V~5.25V Signal switch74S Series 1 Outputs4 Functions


  • Manufacturer: Rochester Electronics, LLC
  • Nocochips NO: 699-DM74S158N
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 417
  • Description: 16 Terminations4.75V~5.25V Signal switch74S Series 1 Outputs4 Functions(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Surface Mount NO
Operating Temperature 0°C~70°C
Packaging Tube
Series 74S
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 16
Type Multiplexer
Terminal Finish TIN LEAD
Technology TTL
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 16
Number of Outputs 1
Qualification Status Not Qualified
Circuit 4 x 2:1
Supply Voltage-Max (Vsup) 5.25V
Supply Voltage-Min (Vsup) 4.75V
Family S
Number of Inputs 2
Current - Output High, Low 1mA 20mA
Output Polarity INVERTED
Voltage Supply Source Single Supply
Independent Circuits 1
Height Seated (Max) 5.08mm
Width 7.62mm
RoHS Status Non-RoHS Compliant

DM74S158N Overview


In order to conserve board space, digital switch is included in the 16-DIP (0.300, 7.62mm).It is packaged in the way of Tube.Through Hole is the mounting method digital switch ic uses.In the multiplexers, the analog IC Multiplexer is used.As long as the operating temperature is 0°C~70°C, turn signal switch will not be influenced by external factors.With a supply voltage of 4.75V~5.25V, designers have greater flexibility of digital controlled switch.As a member of 74S series, the multiplexers can be used for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The multiplexer is supplied with 5V voltage.Currently, this turn signal switch has a total of 16 component pins.The logic switch is a member of the family of S.Keeping Vsup at 4.75V will prevent some unwanted failures.Avoid unnecessary failures by keeping Vsup at 5.25V.As part of the operation of this turn signal switch, there are 1 outputs.The multiplexer is equipped with 2 inputs.

DM74S158N Features


Supplied in the 16-DIP (0.300, 7.62mm) package

DM74S158N Applications


There are a lot of Rochester Electronics, LLC DM74S158N Signal Switches / Multiplexers / Decoders applications.

  • Night vision cameras
  • Speed control of medern motors
  • Frequency multiplexing system
  • Analog, digital or video signal switching
  • Make half adder
  • Paper plants
  • Code conversion
  • Enabling different rows of memory depending on address in memory chips
  • Relay
  • Data-routing applications

Write a review

Note: HTML is not translated!
    Bad           Good