DM74S374N
| Parameters | |
|---|---|
| Packaging | Tube |
| Series | 74S |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | TIN LEAD |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Ports | 2 |
| Clock Frequency | 75MHz |
| Family | S |
| Current - Quiescent (Iq) | 110mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6.5mA 20mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Propagation Delay (tpd) | 20 ns |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
DM74S374N Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. There is an embedded version in the package Tube. The output it is configured with uses Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A 4.75V~5.25Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74Sseries contain this type of chip. Its output frequency should not exceed 75MHz. In total, it contains 1 elements. Despite external influences, it consumes 110mAof quiescent current. 20terminations have occurred. A voltage of 5V is used to power it. An electronic device belonging to the family Scan be found here. The maximal supply voltage (Vsup) reaches 5.25V. For normal operation, the supply voltage (Vsup) should be above 4.75V. This D flip flop is equipped with 0 ports.
DM74S374N Features
Tube package
74S series
DM74S374N Applications
There are a lot of Rochester Electronics, LLC DM74S374N Flip Flops applications.
- Cold spare funcion
- Reduced system switching noise
- Single Up Count-Control Line
- Guaranteed simultaneous switching noise level
- Common Clocks
- Load Control
- Supports Live Insertion
- Power down protection
- Differential Individual
- Pattern generators
