DML3006LFDS-7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | S-PDSO-N8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | On/Off |
| Current - Output (Max) | 10.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| Fault Protection | Short-Circuit, Thermal Shutdown, UVLO |
| Rds On (Typ) | 8m Ω |
| Supply Voltage1-Nom | 1.8V |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 0.5V |
| Height Seated (Max) | 0.85mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
DML3006LFDS-7 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).This package is included in 8-VFDFN Exposed Pad.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 1 for output.The LED driving board is powered by a voltage of 3V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.It contains 8 terminations.Currently, the lighting driver has a total of 1 functions.From the lighting driver, there is a maximum output of 10.5AV.A supply voltage of 3.3V leads to high efficiency.The maximum supply voltage is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must remain above 3V.
DML3006LFDS-7 Features
Supplied from 3.3V
DML3006LFDS-7 Applications
There are a lot of Diodes Incorporated DML3006LFDS-7 Power Switches ICs applications.
- Hot Swap
- Various applications equipped with buttons
- Set-Top Boxes
- Portable GPS Device
- Low Voltage I/O System Power
- USB Protection
- USB Power Distribution
- Smartphone and PDA
- Wireless/Networking Cards
- Hard Disk Drives
