Parameters | |
---|---|
Mounting Type | Surface Mount |
Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
Surface Mount | YES |
Number of Pins | 7 |
Operating Temperature | -55°C~125°C TA |
Packaging | Cut Tape (CT) |
JESD-609 Code | e3 |
Feature | Internal PWM, Status Flag |
Part Status | Obsolete |
Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
Number of Terminations | 7 |
ECCN Code | EAR99 |
Terminal Finish | Matte Tin (Sn) |
Subcategory | Peripheral Drivers |
Terminal Position | SINGLE |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 245 |
Number of Functions | 1 |
Supply Voltage | 24V |
Base Part Number | DRV101 |
Pin Count | 7 |
Number of Outputs | 1 |
Output Voltage | 800mV |
Output Type | Bipolar |
Max Output Current | 1.9A |
Operating Supply Voltage | 24V |
Supply Voltage-Max (Vsup) | 60V |
Interface | On/Off |
Nominal Supply Current | 5mA |
Output Configuration | Low Side |
Output Current | 2.3A |
Voltage - Supply (Vcc/Vdd) | Not Required |
Input Type | Non-Inverting |
Switch Type | Relay, Solenoid Driver |
Ratio - Input:Output | 1:1 |
Voltage - Load | 9V~60V |
Driver Number of Bits | 1 |
Fault Protection | Current Limiting (Fixed), Over Temperature |
Output Peak Current Limit-Nom | 2.3A |
Built-in Protections | OVER CURRENT; THERMAL |
Height | 4.44mm |
Length | 10.1mm |
Width | 8.89mm |
Radiation Hardening | No |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
The DRV101 is a pulse-width modulated (PWM) output low-side power switch. For driving electromechanical devices including valves, solenoids, relays, actuators, and positioners, its robust construction is ideal. Additionally, the DRV101 is excellent for powering thermal equipment like heaters and lamps. PWM operation results in improved reliability because it uses less power and generates less heat. Additionally, PWM that is adjustable enables precise control of the power sent to the load. The time between the DC output and PWM output can be changed externally. For power savings, the DRV101 can be configured to offer a robust initial close before automatically transitioning to a "soft" hold mode. For adaptability, duty cycle can be managed by a resistor, analog voltage, or digital-to-analog converter.
HIGH OUTPUT DRIVE: 2.3A
WIDE SUPPLY RANGE: +9V to +60V
FULLY PROTECTED
Thermal Shutdown with Indicator
Internal Current Limit
PACKAGES: 7-Lead TO-220 and 7-Lead
Surface-Mount DDPAK
FLUID AND GAS FLOW SYSTEMS
INDUSTRIAL CONTROL
FACTORY AUTOMATION
PART HANDLERS
PHOTOGRAPHIC PROCESSING
ELECTRICAL HEATERS