DRV101FKTWTG3
| Parameters | |
|---|---|
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2.3A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 4.44mm |
| Length | 10.1mm |
| Width | 8.89mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Internal PWM, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | DRV101 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Output Type | Bipolar |
| Supply Voltage-Max (Vsup) | 60V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 9V |
| Interface | On/Off |
| Current - Output (Max) | 1.9A |
| Nominal Supply Current | 5mA |
| Output Configuration | Low Side |
| Output Current | 2.3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
DRV101FKTWTG3 Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package TO-263-8, D2Pak (7 Leads + Tab), TO-263CA.A Surface Mount mounting is used for the LED driving board.There is a Relay, Solenoid Driver switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -55°C~125°C TA.As a default, the output is set to 1.A voltage of Not Required is used to power it.It produces a maximum output voltage of Bipolar volts at its maximum output.A lighting driver with Internal PWM, Status Flag features is available.The DRV101 family consists of this type.It has a total of 7 terminations.In order to operate, 7 pins are used.The LED driving board has a total of 1 functions.This LED driver has a maximum output of 1.9AV.With a supply voltage of 24V, high efficiency is possible.In total, it has 7 pins.As a result, the output current is set to 2.3A.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.The maximum supply voltage is set to 60V.For normal operation, the supply voltage (Vsup) should be kept above 9V.A 24V power supply is used by the part.
DRV101FKTWTG3 Features
Supplied from 24V
DRV101FKTWTG3 Applications
There are a lot of Texas Instruments DRV101FKTWTG3 Power Switches ICs applications.
- Set-Top Boxes
- Hot Swap
- PDAs
- HDD and SSD
- Handheld Devices
- Various applications equipped with buttons
- Set-top-box
- USB Power Distribution
- Telecom and Network Systems
- USB Power Distribution
