DRV102T
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Internal PWM, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Voltage - Rated DC | 60V |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Frequency | 24kHz |
| Base Part Number | DRV102 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Voltage | 1.7V |
| Output Type | Bipolar |
| Max Output Current | 2A |
| Operating Supply Voltage | 24V |
| Interface | On/Off |
| Operating Supply Current | 9mA |
| Output Configuration | High Side |
| Output Current | 2.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Propagation Delay | 1.8 μs |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Nominal Input Voltage | 24V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2.7A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 4.6mm |
| Length | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV102T Overview
The LED driver's packaged as a Tube.This file is included in package TO-220-7 (Formed Leads).The lighting driver has the mounting type Through Hole.Relay, Solenoid Driver is the switch type that it owns.Keeping the temperature at -55°C~125°C TA ensures reliable operation.The lighting driver has a total of 1 outputs that are available for use.Operation is based on Not Required supply voltage.Voltage output is Bipolar volts at maximum.Features of the lighting driver are Internal PWM, Status Flag.There is a DRV102 family of things that it belongs to.The termination count is 7.In order to operate, 7 pins are used.There are 1 functions of the LED driver.The maximum output current is reduced to 2A to meet the operation criteria.Using a voltage of 24V allows for high efficiency.The LED driver has a total of 3 pins.The output current is set to 2.7A in this case.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.It is recommended that the supply voltage be set at 24V in order to achieve maximum efficiency.
DRV102T Features
Supplied from 24V
DRV102T Applications
There are a lot of Texas Instruments DRV102T Power Switches ICs applications.
- Wearable Devices
- PDAs
- HDD, SSD
- Set-top-box
- Notebook PC
- Hot Swap
- Various applications equipped with buttons
- USB Power Distribution
- Low Voltage I/O System Power
- Solid-State Drives
