DRV102TG3
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-7 (Formed Leads) |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Internal PWM, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | DRV102 |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Output Voltage | 1.7V |
| Output Type | Bipolar |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 60V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 9mA |
| Output Configuration | High Side |
| Output Current | 2.7A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2.7A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 4.6mm |
| Length | 10.16mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV102TG3 Overview
It is packaged in the manner of a Tube.This package is included in TO-220-7 (Formed Leads).Mounting type Through Hole is selected for the LED driving board.The switch type of this switch is Relay, Solenoid Driver.In order to guarantee reliable performance, the temperature should be set to -55°C~125°C TA.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.It produces a maximum output voltage of Bipolar volts at its maximum output.As far as features are concerned, the LED driving board has Internal PWM, Status Flag.It belongs to the family DRV102.As a result, there are 7 terminations.7 pins are used for operation.The LED driver has 1 functions.This LED driver has a maximum output of 2AV.As long as the supply voltage is 24V, high efficiency can be achieved.The LED driver has a total of 3 pins.This case results in a 2.7A output current.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The maximum supply voltage for this LED driver is 60V (Vsup).A supply voltage of 24V is recommended for maximum efficiency.
DRV102TG3 Features
Supplied from 24V
DRV102TG3 Applications
There are a lot of Texas Instruments DRV102TG3 Power Switches ICs applications.
- Portable GPS
- Wireless Headsets
- Solid State Drivers
- PC Card Hot Swap
- Wearable Devices
- Hot-Swap Systems
- Notebook PC
- Set-top-box
- USB Power Distribution
- USB Protection
