Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Internal PWM, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Peripheral Drivers |
Technology |
NMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
24V |
Frequency |
100kHz |
Base Part Number |
DRV103 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
400mV |
Output Type |
N-Channel |
Max Output Current |
1.5A |
Operating Supply Voltage |
24V |
Supply Voltage-Max (Vsup) |
32V |
Interface |
On/Off |
Output Configuration |
Low Side |
Output Current |
1.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Propagation Delay |
1 μs |
Input Type |
Non-Inverting |
Turn On Delay Time |
1 μs |
Switch Type |
Relay, Solenoid Driver |
Output Characteristics |
OPEN-DRAIN |
Rise Time |
2μs |
Fall Time (Typ) |
2 μs |
Ratio - Input:Output |
1:1 |
Input Characteristics |
STANDARD |
Voltage - Load |
8V~32V |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Number of Drivers |
1 |
Output Peak Current Limit-Nom |
3.5A |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DRV103U Overview
It is packaged in the manner of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.This switch is of type Relay, Solenoid Driver.To ensure reliable operation, set the temperature to -55°C~125°C TA.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.Internal PWM, Status Flag features are available on the lighting driver.As you can see, it comes from the DRV103 family.It contains 8 terminations.During operation, the 8 pins are used.Currently, the lighting driver has a total of 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.Using a voltage of 24V allows for high efficiency.A total of 8 pins are included in this LED driver.The output current is set to 1.5A in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The Vsup value (maximum supply voltage) is set to 32V.It is recommended to set the supply voltage to 24V for optimum efficiency.1 drivers are available for the part.
DRV103U Features
Supplied from 24V
DRV103U Applications
There are a lot of Texas Instruments DRV103U Power Switches ICs applications.
- Low Voltage I/O System Power
- Handheld Devices
- Notebook PC
- HDD, SSD
- Hot-Swap Systems
- Solid State Drivers
- Hot Swap
- Portable/Handheld Devices
- Telecom and Network Systems
- Hot Swaps