DRV103U/2K5
| Parameters | |
|---|---|
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Internal PWM, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Frequency | 100kHz |
| Base Part Number | DRV103 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Propagation Delay | 1 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Switch Type | Relay, Solenoid Driver |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 2μs |
| Fall Time (Typ) | 2 μs |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 8V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 3.5A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
DRV103U/2K5 Overview
A Tape & Reel (TR) is used to package it.This file is included in package 8-SOIC (0.154, 3.90mm Width).The LED driver is mounted as Surface Mount.The switch type of this switch is Relay, Solenoid Driver.It is recommended to set the temperature to -55°C~125°C TA in order to ensure reliable operation.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.A lighting driver with Internal PWM, Status Flag features is available.It belongs to the family DRV103.A total of 8 terminations have been recorded.For operation, we use the 8 pins.It contains 1 functions.Maximum output current falls to 1.5A when operation criteria are met.High efficiency is possible when the supply voltage is set to 24V.The LED driving board is equipped with a total of 8 pins.When this case is used, the output current is set to 1.5A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The Vsup value (maximum supply voltage) is set to 32V.It is recommended to set the supply voltage to 24V for optimum efficiency.
DRV103U/2K5 Features
Supplied from 24V
DRV103U/2K5 Applications
There are a lot of Texas Instruments DRV103U/2K5 Power Switches ICs applications.
- USB Protection
- HDD and SSD
- Storage (HDDs, SSDs)
- PC Cards
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- Set-top-box
- Solid-State Drives
- Notebook PC
- Mobile Communication Devices
