DRV103UG4
| Parameters | |
|---|---|
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Internal PWM, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | NMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | DRV103 |
| Pin Count | 8 |
| Output Voltage | 40V |
| Output Type | N-Channel |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 32V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Propagation Delay | 1 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 μs |
| Switch Type | Relay, Solenoid Driver |
| Output Characteristics | OPEN-DRAIN |
| Rise Time | 2μs |
| Fall Time (Typ) | 2 μs |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 8V~32V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 3.5A |
DRV103UG4 Overview
It is packaged in the form of a Tube.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The mounting type of the LED driver is Surface Mount.This switch is of type Relay, Solenoid Driver.It is recommended that the temperature be set to -55°C~125°C TA for reliable operation.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.Currently, the LED driving board is equipped with Internal PWM, Status Flag features.There is a DRV103 family of things that it belongs to.The termination count is 8.It is necessary to use the 8 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.Supply voltages of 24V allow for high efficiency.8 pins are connected to it in total.In this case, the output current is set to 1.5A.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.The Vsup value (maximum supply voltage) is set to 32V.For maximum efficiency, the supply voltage should be set to 24V.There are 1 drivers associated with the part.
DRV103UG4 Features
Supplied from 24V
DRV103UG4 Applications
There are a lot of Texas Instruments DRV103UG4 Power Switches ICs applications.
- Wireless Headsets
- Smartphone and PDA
- HDD and SSD
- PC Cards
- Solid State Drivers
- Gaming
- Wireless/Networking Cards
- USB Power Distribution
- Low Voltage I/O System Power
- Handheld Devices
