DRV104PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Internal PWM, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | DRV104 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Max Output Current | 1.2A |
| Supply Voltage-Max (Vsup) | 32V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Propagation Delay | 2.2 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.2 μs |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 8V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV104PWP Overview
Tube is how it's packaged.It is included in the package 14-PowerTSSOP (0.173, 4.40mm Width).Surface Mount is the mounting type of the LED driver.The switch type of this switch is Relay, Solenoid Driver.To ensure reliable operation, set the temperature to -55°C~125°C TA.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.Features of the lighting driver are Internal PWM, Status Flag.It comes under the family of DRV104.The termination count is 14.The 14 pins are used to operate the LED driver.The LED driver has 1 functions.As a result, the maximum output current is reduced to 1.2A in order to meet the operation requirements.The supply voltage of 24V is conducive to high efficiency.As a result, it has a total of 14 pins.In this case, the output current will be set to 2A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The maximum supply voltage for this LED driver is 32V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 8V.This part's power supply is 24V.
DRV104PWP Features
Supplied from 24V
DRV104PWP Applications
There are a lot of Texas Instruments DRV104PWP Power Switches ICs applications.
- Portable Music Players
- PC Cards
- Storage (HDDs, SSDs)
- Notebook PC
- Portable GPS
- Smartphone and PDA
- Smart Phones, Feature Phones
- USB Power Distribution
- Hot Swap
- HDD, SSD
