DRV104PWPR
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Propagation Delay | 2.2 μs |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.2 μs |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 8V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Internal PWM, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | DRV104 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 40V |
| Max Output Current | 1.2A |
DRV104PWPR Overview
It is packaged in the manner of a Cut Tape (CT).In the 14-PowerTSSOP (0.173, 4.40mm Width) package, it is included.The lighting driver has the mounting type Surface Mount.There is a Relay, Solenoid Driver switch type associated with it.It is best to set the temperature to -55°C~125°C TA to ensure reliable operation.The LED driver is equipped with 1 outputs.The LED driving board operates at Not Required volts.Currently, the LED driving board is equipped with Internal PWM, Status Flag features.It is part of the DRV104 family of LED drivers.It contains 14 terminations.In order to operate, 14 pins are used.As far as functions are concerned, the lighting driver has 1.This results in the maximum output current dropping to 1.2A to meet the operation criteria.The supply voltage can be 24V for high efficiency.There are 14 pins in total on this board.When this is the case, the output current is set to 2A.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 8V.The total number of channels is 2.
DRV104PWPR Features
Supplied from 24V
2 channels
DRV104PWPR Applications
There are a lot of Texas Instruments DRV104PWPR Power Switches ICs applications.
- Hot Swaps
- USB Protection
- Set-Top Boxes
- Storage Drives
- Set-top-box
- Portable/Handheld Devices
- USB Power Distribution
- Storage (HDDs, SSDs)
- HDD and SSD
- Wearable Devices
