DRV104PWPRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Internal PWM, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Base Part Number | DRV104 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 450mV |
| Operating Supply Voltage | 32V |
| Power Supplies | 24V |
| Interface | On/Off |
| Current - Output (Max) | 1.2A |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 8V~32V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2A |
| Built-in Protections | OVER CURRENT; THERMAL |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV104PWPRG4 Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the 14-PowerTSSOP (0.173, 4.40mm Width) package.The lighting driver has the mounting type Surface Mount.There is a Relay, Solenoid Driver switch type associated with it.To ensure reliable performance, the temperature should be set to -55°C~125°C TA.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.As far as features are concerned, the LED driving board has Internal PWM, Status Flag.I believe it belongs to the DRV104 family.It has a total of 14 terminations.During operation, the 14 pins are used.There are 1 functions of the LED driver.This LED driver has a maximum output of 1.2AV.With a supply voltage of 24V, high efficiency is possible.The LED driver has a total of 14 pins.The output current is set to 2A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.This part has a power supply of 24V volts.In order to achieve the best efficiency, the supply voltage should be set to 32V.
DRV104PWPRG4 Features
Supplied from 24V
DRV104PWPRG4 Applications
There are a lot of Texas Instruments DRV104PWPRG4 Power Switches ICs applications.
- Portable GPS Device
- Telecom and Network Systems
- PC Card Hot Swap
- Portable/Handheld Devices
- Storage (HDDs, SSDs)
- Notebook PC
- USB Ports/Hubs
- Hard Disk Drives
- HDD and SSD
- Portable Video Game Players
