DRV10975PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Appliance |
| Technology | Power MOSFET |
| Voltage - Supply | 6.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DRV10975 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Operating Supply Voltage | 12V |
| Supply Voltage-Max (Vsup) | 18V |
| Supply Voltage-Min (Vsup) | 6.5V |
| Interface | Analog, I2C, PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Operating Supply Current | 4.5mA |
| Output Configuration | Half Bridge (3) |
| Current - Output | 1.5A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 7mA |
| Voltage - Load | 6.5V~18V |
| Drain to Source Resistance | 1Ohm |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV10975PWPR Overview
Drivers controllers is designed with Tape & Reel (TR) package.Drivers controllers comes in a 24-TSSOP (0.173, 4.40mm Width) Exposed Pad case.To mount the part by [0], it is recommended that you do so.The component connected in Applianceis compatible with it.The device can supply 6.5V~18V volts.Operation temperature ranges from -40°C~125°C TJ.Drivers controllers is possible to categorize the motor type as Brushless DC (BLDC).This part has 24termination options.You can apply voltage at 6.5V~18Vto the load.Drivers controllers is important to note that this amplifier should be operated at the 12Vsetting.In terms of mounting, it is recommended that it be mounted in Surface Mount.Set the part's output current to 1.5A.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.The part number DRV10975indicates that it is found.There are 24 pins on it.There are 3 outputs available.The supply voltage for this driver is 12V.For its operation, a supply current of 4.5mAis used.
DRV10975PWPR Features
Applications : Appliance
Load voltage across the chip 6.5V~18V
base on DRV10975 number
designed with 3 outputs
DRV10975PWPR Applications
There are a lot of Texas Instruments DRV10975PWPR motor drivers applications.
- LED ballasts
- Industrial lighting
- Human-centric lighting
- Running preventive- maintenance diagnostics
- Automotive applications
- Outdoor area lights
- parking lights
- Smart lighting applications
- Hospitality buildings
- Fog lamps
