DRV10983PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Appliance |
| Technology | Power MOSFET |
| Voltage - Supply | 8V~28V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Frequency | 100kHz |
| Base Part Number | DRV10983 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Output Voltage | 24V |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Analog, I2C, PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Operating Supply Current | 11mA |
| Output Configuration | Half Bridge (3) |
| Current - Output | 2A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 5mA |
| Voltage - Load | 8V~28V |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV10983PWP Overview
Drivers controllers includes a Tubepackage.There is 24-TSSOP (0.173, 4.40mm Width) Exposed Pad case included with the part.In general, it is recommended that the part be mounted by Surface Mount.Fits the component connected to Appliance.There is a capability for the device to provide 8V~28V volts.Regarding the operating temperature, it is in the range of -40°C~125°C TJ°C.A Brushless DC (BLDC)motor can be classified as a type of motor.In this part, there are 24 terminations available.There is the option of applying the voltage to the load at the rate of 8V~28V.Drivers controllers is important to remember that this amplifier should be run at 24V.Surface Mountis its recommended mounting method.Maintain a 2Aoutput current for the part.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.As a result of the DRV10983part number, it can be found.In this device, there are 24 pins.A total of 3outputs are available.The driver is powered by a 24Vvolt supply.The output voltage is maintained at 24V.For its operation, a supply current of 11mAis used.The frequency that can be achieved is 100kHz.
DRV10983PWP Features
Applications : Appliance
Load voltage across the chip 8V~28V
base on DRV10983 number
designed with 3 outputs
DRV10983PWP Applications
There are a lot of Texas Instruments DRV10983PWP motor drivers applications.
- Automotive applications
- Infotainment backlighting
- Step-up or step-down driver topologies
- Camcorders
- Dome
- Indicator
- Display LED backlighting
- Handheld devices
- Automotive exterior and interior lighting
- Fog lamps
