DRV11873PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Fan Motor Driver |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 5V~16V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Base Part Number | DRV11873 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | PWM |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 2.7mA |
| Output Configuration | Half Bridge (3) |
| Output Current-Max | 2A |
| Supply Current-Max (Isup) | 5mA |
| Collector Emitter Voltage (VCEO) | 16V |
| Max Collector Current | 1.5A |
| Voltage - Load | 0V~17V |
| Switching Frequency | 100kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV11873PWPR Overview
Drivers controllers is designed wDrivers controllersh a package of [0].This part is packed in a 16-PowerTSSOP (0.173, 4.40mm Width) case.A mounting position of Surface Mountis recommended for the part.As a result, it is appropriate for the component connected to Fan Motor Driver.There is a possibility of providing 5V~16Vvolts through the device.With regard to operating temperature, it ranges -40°C~125°C TJ. A motor of this type can be categorized as Brushless DC (BLDC).A total of 16terminations are available in this part.Drivers controllers is possible to apply voltage to the load at the rate of 0V~17V.The amplifier should be set to 12V.Ideally, it should be mounted in the Surface Mountposition.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.This can be determined by looking at the DRV11873 part number.16 pins are provided for its design.The Motion Control Electronicsseries contains it.There are 3 outputs available.0 indicates that the motor type is [0].
DRV11873PWPR Features
Applications : Fan Motor Driver
Load voltage across the chip 0V~17V
base on DRV11873 number
designed with 3 outputs
Motor Type classified as Brushless DC (BLDC)
DRV11873PWPR Applications
There are a lot of Texas Instruments DRV11873PWPR motor drivers applications.
- Large format LED backlighting
- Lighting for health and wellbeing
- LED bias
- LED ballasts
- Large outdoor LED display
- Alternative to HID lights
- Mobile phone display backlight and key light driving
- Tunnel lights
- A cross between entertainment
- Lighting for the ambience of tunability
