DRV120PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Internal PWM, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV120 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 26V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Output Current | 160mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Output Characteristics | OPEN-DRAIN |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 6V~26V |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.25A |
| Max Junction Temperature (Tj) | 125°C |
| Built-in Protections | THERMAL; UNDER VOLTAGE |
| Ambient Temperature Range High | 105°C |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV120PWR Overview
As a result, it is packaged in the form of a Cut Tape (CT).In the 8-TSSOP (0.173, 4.40mm Width) package, it is included.Surface Mount is the mounting type of the LED driver.It owns Relay, Solenoid Driver switch type.To ensure reliable operation, set the temperature to -40°C~105°C TA.The LED driver has a total of 1 outputs.The LED driving board operates at Not Required volts.It produces a maximum output voltage of N-Channel volts at its maximum output.It has a total of Internal PWM, Status Flag features.It is part of the DRV120 family of LED drivers.It contains 8 terminations.The 8 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.As long as the supply voltage is 12V, high efficiency can be achieved.Surface Mount is mounted in the way of this lighting driver.The output current is set to 160mA in this case.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.A supply voltage of 26V is recommended for maximum efficiency.
DRV120PWR Features
Supplied from 12V
DRV120PWR Applications
There are a lot of Texas Instruments DRV120PWR Power Switches ICs applications.
- Low Voltage I/O System Power
- Notebook PC
- USB3.1 Power Delivery
- Smartphone and PDA
- Various applications equipped with buttons
- Hot-Swap Systems
- Hot Swap
- Telecom and Network Systems
- USB Ports/Hubs
- USB Power Distribution
