DRV135UA
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 10kOhm |
| Applications | Pre-Amplifier, Professional Audio |
| Technology | HYBRID |
| Voltage - Supply | ±4.5V~18V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 18V |
| Base Part Number | DRV135 |
| Function | Line Driver |
| Number of Elements | 3 |
| Number of Channels | 1 |
| Voltage | 18V |
| Interface | Analog |
| Nominal Supply Current | 5.2mA |
| Quiescent Current | 5.2mA |
| Slew Rate | 15 V/μs |
| Common Mode Rejection Ratio | 46 dB |
| Input Offset Voltage (Vos) | 10mV |
| Bandwidth | 1.5MHz |
| Differential Output | Yes |
| Voltage Gain | 6dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Specifications | Differential Output |
| Gain | 6 dB |
| Input Characteristics | STANDARD |
| Max Dual Supply Voltage | 18V |
| Driver Number of Bits | 1 |
| Min Dual Supply Voltage | 4.5V |
| Negative Supply Voltage-Nom | -18V |
| Supply Voltage1-Nom | 18V |
| Out Swing-Min | 20 V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
DRV135UA Overview
The book is also accompanied by a case, which only adds to the value of the book. It is recommended that you mount it in a Surface Mount mounting type. In this case, it is embedded in the 8-SOIC (0.154, 3.90mm Width) case. It has 1 channels. You can refer to Line Driver functions in this part. In addition to being used in Pre-Amplifier, Professional Audio, the device can be used in Y as well. Votage within ±4.5V~18V is supplied. In this device, the temperature range is -55°C~125°C TA, which is the range of this device. This chip has 8 terminations, which means it has 8 terminations on it. If you search for the DRV135 family, you will find similar parts. The following specifications apply to the device: Differential Output. There are 8 pins accessible on the chip. Surface Mount mounts it on to the wall. This device can handle a voltage of 18V as a supply voltage. Keeping the voltage gain at 6 dB is a good idea. It is important to know that there is a 1.5MHz bandwidth for data transfer. It is important that the device resistance stays within the range of 10kOhm.
DRV135UA Features
With 8-SOIC (0.154, 3.90mm Width) channels
operate temperature at the range of -55°C~125°C TA
Supply voltage at 18V volts
stay resistance at 10kOhm
DRV135UA Applications
There are a lot of Texas Instruments DRV135UA Audio Special Purpose applications.
- Graphic and P arametric Equalizers
- AUDIO TEST EQUIPMENT
- Telecom Systems
- Televisions and smart soundbars
- DIGITAL AUDIO WORKSTATIONS
- High-End Audio/Sound Card for PC
- High-performance soundcards
- Mobile computing
- Distribution Amplifiers
- AV/DVD Receiver, AV Amplifier
