DRV2603RUNT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Haptic Feedback |
| Technology | Power MOSFET |
| Voltage - Supply | 2.5V~5.2V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 250kHz |
| Base Part Number | DRV2603 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.2V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | Parallel, PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 1.5mA |
| Output Configuration | Half Bridge (2) |
| Quiescent Current | 1.7mA |
| Voltage - Load | 2.5V~5.2V |
| Motor Type - AC, DC | ERM, LRA |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV2603RUNT Overview
Drivers controllers is designed with Tape & Reel (TR) package.This part is packaged with a case of [0].Mounting the part by Surface Mountis recommended.The component connected in Haptic Feedbackis compatible with it.Drivers controllers is capable of supplying 2.5V~5.2V volts.This device operates at a temperature of -40°C~150°C TJ.Motors can be classified as ERM, LRA.In this part, there are 10 terminations available.At a rate of [0], voltage can be applied to the load.In order to get the best performance from this amplifier, it should be run at 3.6V.Its recommended mounting way is Surface Mount.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.The DRV2603part number is used to locate the part.In this device, there are 10 pins.There are 1 outputs available.There is a frequency of 250kHzthat can be achieved.
DRV2603RUNT Features
Applications : Haptic Feedback
Load voltage across the chip 2.5V~5.2V
base on DRV2603 number
designed with 1 outputs
DRV2603RUNT Applications
There are a lot of Texas Instruments DRV2603RUNT motor drivers applications.
- RGB and monochromatic LED drivers for signage and traffic signals
- Infotainment backlighting
- Horticultural lighting
- Telltale lights
- Camera-enabled smartphones
- Arena lighting
- Display LED backlighting
- Footwell lighting
- Alternative to HID lights
- Indicator
