DRV2604YZFR
| Parameters | |
|---|---|
| Package / Case | 9-UFBGA, DSBGA |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Haptic Feedback |
| Technology | Power MOSFET |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DRV2604 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 5.5V |
| Operating Supply Voltage | 5.5V |
| Interface | I2C |
| Nominal Supply Current | 600μA |
| Output Configuration | Differential |
| Quiescent Current | 600μA |
| Logic Function | AND |
| Voltage - Load | 2.5V~5.5V |
| Motor Type - AC, DC | ERM, LRA |
| Height | 625μm |
| Length | 1.75mm |
| Width | 1.75mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
DRV2604YZFR Overview
This package is designed to work with [0].A 9-UFBGA, DSBGAcase is included with the part.The part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in Haptic Feedback.There is a possibility of providing 2.5V~5.5Vvolts through the device.This device operates at a temperature range of -40°C~85°C TA.Drivers controllers is possible to categorize the motor type as ERM, LRA.In this part, there are 9 terminations available.At a rate of [0], voltage can be applied to the load.You should run this amplifier at 3.6V.Its recommended mounting way is Surface Mount.This can be determined by looking at the DRV2604 part number.There are 9 pins on it.A supply voltage of 5.5V is required for the operation of this driver.In this case, the output voltage is maintained at 5.5V.
DRV2604YZFR Features
Applications : Haptic Feedback
Load voltage across the chip 2.5V~5.5V
base on DRV2604 number
DRV2604YZFR Applications
There are a lot of Texas Instruments DRV2604YZFR motor drivers applications.
- Horticultural applications
- Hospitality buildings
- parking lights
- Running preventive- maintenance diagnostics
- PDAs
- Tail lights
- Daytime running lights (DRLs)
- Footwell lighting
- LED ballasts
- Landscape lighting
