DRV2605LTDGSRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Applications | Haptic Feedback |
| Technology | Power MOSFET |
| Voltage - Supply | 2V~5.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV2605 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 5.2V |
| Supply Voltage-Min (Vsup) | 2V |
| Interface | I2C |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Quiescent Current | 500μA |
| Logic Function | AND |
| Voltage - Load | 2V~5.2V |
| Motor Type - AC, DC | ERM, LRA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV2605LTDGSRQ1 Overview
The package contains [0].This part is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case.Drivers controllers is recommended to mount the part by Surface Mount.Fits the component connected to Haptic Feedback.The device is capable of supplying a voltage of 2V~5.2V volts.With regard to operating temperature, it ranges -40°C~150°C TJ. Drivers controllers is possible to categorize the motor type as ERM, LRA.There are 10 terminations available on this part.Drivers controllers is possible to apply voltage to the load at the rate of 2V~5.2V.Drivers controllers is important to remember that this amplifier should be run at 3.6V.The recommended mounting method is Surface Mount.A BRUSH DC MOTOR CONTROLLERanalog IC is employed in this device.This can be determined by looking at the DRV2605 part number.10pins are available on the device.Automotive, AEC-Q100is maintained as the output voltage.
DRV2605LTDGSRQ1 Features
Applications : Haptic Feedback
Load voltage across the chip 2V~5.2V
base on DRV2605 number
DRV2605LTDGSRQ1 Applications
There are a lot of Texas Instruments DRV2605LTDGSRQ1 motor drivers applications.
- CHMSL (center high-mount stop lamps)
- LED bias
- Dome
- LED ballasts
- Charge pump circuits
- RGB and monochromatic LED drivers for signage and traffic signals
- Landscape lighting
- Outdoor area lights
- Commercial office
- Side marker lights
