DRV8312DDWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-TSSOP (0.244, 6.20mm Width) Exposed Pad |
| Number of Pins | 44 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 10.8V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.635mm |
| Base Part Number | DRV8312 |
| Pin Count | 44 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 12V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 12mA |
| Output Configuration | Half Bridge (3) |
| Output Current | 3.5A |
| Voltage - Load | 0V~52.5V |
| Fault Protection | Current Limiting, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 80m Ω LS, 80m Ω HS |
| Current - Peak Output | 6.5A |
| Load Type | Inductive |
| Height | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8312DDWR Overview
In this package, Tape & Reel (TR) is used.The 44-TSSOP (0.244, 6.20mm Width) Exposed Pad package includes H bridge to save money.Bridge driver is possible to ensure improved reliabilbridge drivery by varying the supply voltage of 10.8V~13.2V.H bridge circuit is mounted in the way of Surface Mount.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.DC Motors, General Purpose is pretty useful in a variety of applications.In order to mount H gate on the PCB, Surface Mount is used.Bootstrap Circuit, Status Flag is one of full bridges specific characteristics.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 44 terminations.44 pins is used as pronged contacts as H bridge ic of a signal interface.The DRV8312 base H bridge ic number is the key to finding more related H bridge ics.The H bridge is powered by a voltage supply of 12V.IC type BRUSH DC MOTOR CONTROLLER is used as H bridge circuit's analog IC.A maximum current is reached by output when H-bridge reaches 6.5A.A current of 3.5A flows through the pins of the output and power supply.The 44 pins of this bridge driver work together to allow it to perform its specific functions.The output of this Hbridge is 1.As part of the Motion Control Electronics subcategory, this H bridge motor driver has various similarities to other parts in this category.The operating supply voltage is maintained at 12V in order to ensure high efficiency.
DRV8312DDWR Features
Available in 44-TSSOP (0.244, 6.20mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : DRV8312
Subcategory: 6.5A
Number of Receivers: 12V
DRV8312DDWR Applications
There are a lot of Texas Instruments DRV8312DDWR Full Bridge Drivers, Half-Bridge Drivers applications.
- High current, low profile DC-DC converters
- Industrial Automation
- V-Core
- Workstations
- CD players
- Home Appliances
- Non-V-Core
- Voltage Regulators for DDR memory arrays
- Networking Microprocessor Voltage Regulators
- Dual DC motor
