DRV8332DKD

DRV8332DKD datasheet pdf and PMIC - Full, Half-Bridge Drivers product details from Texas Instruments stock available at Noco

Manufacturer: Texas Instruments
Nocochips NO: 815-DRV8332DKD
Package: 36-BSSOP (0.433, 11.00mm Width) Exposed Pad
Datasheet: PDF
Stock: 723
Description: DRV8332DKD datasheet pdf and PMIC - Full, Half-Bridge Drivers product details from Texas Instruments stock available at Noco(Kg)

Inquiry Now

Details

Tags

Parameters
Max Output Current	13A
Operating Supply Voltage	12V
Power Supplies	1250V
Supply Voltage-Min (Vsup)	10.8V
Interface	PWM
Analog IC - Other Type	BRUSH DC MOTOR CONTROLLER
Nominal Supply Current	8A
Output Configuration	Half Bridge (3)
Output Current	8A
Output Current per Channel	8A
Supply Current-Max (Isup)	12mA
Collector Emitter Voltage (VCEO)	52V
Max Collector Current	8A
Voltage - Load	0V~52.5V
Fault Protection	Current Limiting, Over Temperature, Short Circuit, UVLO
Rds On (Typ)	80m Ω LS, 80m Ω HS
Switching Frequency	500kHz
Motor Type	Brushless DC (BLDC)
Current - Peak Output	13A
Load Type	Inductive
Height	3.6mm
Length	15.9mm
Width	11mm
Thickness	3.5mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	36-BSSOP (0.433, 11.00mm Width) Exposed Pad
Number of Pins	36
Operating Temperature	-40°C~150°C TJ
Packaging	Tube
JESD-609 Code	e4
Feature	Bootstrap Circuit, Status Flag
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	4 (72 Hours)
Number of Terminations	36
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Applications	DC Motors, General Purpose
Subcategory	Motion Control Electronics
Technology	Power MOSFET
Voltage - Supply	10.8V~13.2V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	12V
Terminal Pitch	0.65mm
Base Part Number	DRV8332
Pin Count	36
Number of Outputs	3

DRV8332DKD Overview

Tube is used to package H bridge.H bridge is provided in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package for the sake of cost savings.Based on 10.8V~13.2V, improved reliabilbridge drivery can be achieved.Mounted on Surface Mount.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.H bridge motor driver has many applications, including DC Motors, General Purpose.On PCBs, Surface Mount mounts H gate.Bootstrap Circuit, Status Flag is one of full bridges specific characteristics.A transmission line can be terminated at a 36 termination with the H bridge whose characteristic impedance matches the transmission line.As H bridge ic of a signal interface, 36 pins are used as pronged contacts.This H bridge ic has a base H bridge ic number of DRV8332 which allows more related H bridge ics to be identified.For the operation of the H bridge, a voltage supply of 12V is used.H bridge circuit has been incorporated with BRUSH DC MOTOR CONTROLLER as its analog IC type.The maximum load current a power supply can provide at a specified ambient temperature is 13A.Onput current that reaches 13A at maximum.The output and power supply pins are flowing wH-bridgeh current 8A.It is through 36 pins that this bridge driver is able to perform its specific functions.The output of this Hbridge is 3.H bridge motor drivers in the subcategory Motion Control Electronics have a wide range of similarities.For the highest level of efficiency, the operating supply voltage is kept at 12V.The electric power of 1250V is supplied to the electrical load.

DRV8332DKD Features

Available in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : DRV8332
Subcategory: 13A
Number of Receivers: 12V