DRV8332DKDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Bootstrap Circuit, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 10.8V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Base Part Number | DRV8332 |
| Pin Count | 36 |
| Number of Outputs | 1 |
| Output Voltage | 52.5V |
| Max Output Current | 13A |
| Operating Supply Voltage | 12V |
| Interface | PWM |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 9mA |
| Output Configuration | Half Bridge (3) |
| Output Current | 8A |
| Output Current per Channel | 8A |
| Voltage - Load | 0V~52.5V |
| Fault Protection | Current Limiting, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 80m Ω LS, 80m Ω HS |
| Load Type | Inductive |
| Height | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Thickness | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8332DKDR Overview
In this package, Tape & Reel (TR) is used.A cost-saving measure is taken to include H bridge in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.Based on 10.8V~13.2V, improved reliabilbridge drivery can be achieved.There is a mounting of H bridge circuit in Surface Mount.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.H bridge motor driver can be used for a variety of purposes, including DC Motors, General Purpose.H gate is mounted on the PCB using Surface Mount.Bootstrap Circuit, Status Flag is one of full bridges specific characteristics.A transmission line is terminated with a H bridge that matches its characteristic impedance, referred to as a 36 termination.An interface using 36 pins is used to provide pronged contact.Its base H bridge ic number, DRV8332, is used to identify related H bridge ics.The H bridge is powered by a voltage supply of 12V.H bridge circuit is incorporated with BRUSH DC MOTOR CONTROLLER as its analog IC type.The maximum load current that power supply can provide at a specified ambient temperature reaches 13A.The output pins and the power supply pins are conducting 8A current.A bridge driver's 36 pins work together in order to perform its specific functions.The Hbridge is equipped with 1 outputs.There are numerous similarities between this H bridge motor driver and other parts in the subcategory of Motion Control Electronics.Keeping the operating supply voltage at 12V ensures high efficiency.52.5V represents the voltage released by the Hbridge.
DRV8332DKDR Features
Available in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : DRV8332
Number of Receivers: 12V
DRV8332DKDR Applications
There are a lot of Texas Instruments DRV8332DKDR Full Bridge Drivers, Half-Bridge Drivers applications.
- Audio-visual equipment
- Dual DC motor
- Voltage Regulators for GPUs
- Workstations
- Home Appliances
- Telecom Microprocessor
- Industrial Fans
- DVD players
- DC-DC Converters
- CD players
