DRV8402DKD
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 11.4V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 50V |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Base Part Number | DRV8402 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 5V |
| Operating Supply Voltage | 12.3V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 12mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 5A |
| Collector Emitter Voltage (VCEO) | 50V |
| Max Collector Current | 10A |
| Voltage - Load | 0V~52.5V |
| Input Current | 9mA |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushless DC (BLDC), Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Thickness | 3.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8402DKD Overview
This package was designed with Tubein mind.36-BSSOP (0.433, 11.00mm Width) Exposed Padcases are included with the part.Mounting the part by Surface Mountis recommended.This component is suitable for the component connected to General Purpose.The device is capable of supplying a voltage of 11.4V~13.2V volts.This device operates at a temperature range of -40°C~150°C TJ.Motors can be classified as Brushless DC (BLDC), Brushed DC.There are 36 terminations available on this part.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is important to note that this amplifier should be operated at the 50Vsetting.Surface Mountis its recommended mounting method.Ensure that the part output current remains at 5A.There is an analog integrated circuit BRUSH DC MOTOR CONTROLLERpresent in the device.The part number DRV8402indicates that it is found.A device with 36pins is available.In the Motion Control Electronicsseries, it is included.Drivers controllers operates from a voltage of 12.3V volts.A voltage of 5Vis maintained at the output.Drivers controllers is possible to recognize Brushedas the type of motor.For its operation, a supply current of 12mAis used.A total of 2channels are available.Controller ic is possible to reach a frequency of 500kHz.
DRV8402DKD Features
Applications : General Purpose
Load voltage across the chip 0V~52.5V
base on DRV8402 number
Motor Type classified as Brushed
DRV8402DKD Applications
There are a lot of Texas Instruments DRV8402DKD motor drivers applications.
- Horticultural lighting
- drivers for outdoor application
- Home lighting systems
- Multiple output capability
- Infotainment backlighting
- Telltale lights
- Industrial lighting
- Running preventive- maintenance diagnostics
- Indicator circuit
- CHMSL (center high-mount stop lamps)
