Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
44-TSSOP (0.244, 6.20mm Width) Exposed Pad |
Number of Pins |
44 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
44 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Applications |
DC Motors, Stepper Motors |
Subcategory |
Motion Control Electronics |
Technology |
Power MOSFET |
Voltage - Supply |
10.8V~13.2V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
50V |
Terminal Pitch |
0.635mm |
Base Part Number |
DRV8412 |
Pin Count |
44 |
Number of Outputs |
2 |
Output Voltage |
5V |
Max Output Current |
6A |
Operating Supply Voltage |
50V |
Interface |
PWM |
Analog IC - Other Type |
STEPPER MOTOR CONTROLLER |
Operating Supply Current |
10.5mA |
Output Configuration |
Half Bridge (4) |
Output Current |
6A |
Output Current per Channel |
3A |
Collector Emitter Voltage (VCEO) |
52V |
Max Collector Current |
6A |
Voltage - Load |
0V~52.5V |
Fault Protection |
Current Limiting, Over Temperature, Short Circuit, UVLO |
Rds On (Typ) |
110m Ω LS, 110m Ω HS |
Switching Frequency |
500kHz |
Motor Type |
Brushed |
Load Type |
Inductive |
Height |
1.2mm |
Length |
14mm |
Width |
6.1mm |
Thickness |
1.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DRV8412DDW Overview
For packaging, it is used with Tube.As a cost-saving measure, H bridge is included in the 44-TSSOP (0.244, 6.20mm Width) Exposed Pad package.Bridge driver is possible to improve the reliabilbridge drivery of 10.8V~13.2V by increasing the supply voltage.H bridge circuit is put into place in the way of Surface Mount.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.This tool is useful for a number of applications, including DC Motors, Stepper Motors.Using Surface Mount, the board is mounted.Full bridge also possesses Status Flag as a specific characteristic.It is possible to terminate a transmission line with a 44 termination using the H bridge which matches the characteristic impedance of the transmission line.As H bridge ic of a signal interface, 44 pins are used as pronged contacts.Its base H bridge ic number of DRV8412 is the basis to find more related H bridge ics.The H bridge operates at a voltage of 50V.As its analog IC type, H bridge circuit has been incorporated with STEPPER MOTOR CONTROLLER.At a specified ambient temperature, the maximum load current that the power supply can provide is 6A.A current of 6A flows through the pins of the output and power supply.It is through 44 pins that this bridge driver is able to perform its specific functions.The Hbridge is equipped with 2 outputs.There are many similarities between this H bridge motor driver and other components in the subcategory of Motion Control Electronics.It is important to maintain the operating supply voltage at 50V in order to ensure high efficiency.It is calculated that the Hbridge releases 5V volts.
DRV8412DDW Features
Available in 44-TSSOP (0.244, 6.20mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : DRV8412
Number of Receivers: 50V
DRV8412DDW Applications
There are a lot of Texas Instruments DRV8412DDW Full Bridge Drivers, Half-Bridge Drivers applications.
- DVD players
- High-Performance Gaming Motherboards
- Voltage Regulators for DDR memory arrays
- Voltage Regulators
- V-Core
- Telecom Microprocessor
- High-Current DC-DC Point-of-Load Converters
- PC peripherals
- Networking Microprocessor Voltage Regulators
- Industrial Fans