DRV8432DKD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, Stepper Motors |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 10.8V~13.2V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 50V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8432 |
| Pin Count | 36 |
| Number of Outputs | 2 |
| Output Voltage | 30V |
| Operating Supply Voltage | 50V |
| Interface | PWM |
| Nominal Supply Current | 9mA |
| Output Configuration | Half Bridge (4) |
| Output Current | 14A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 6A |
| Voltage - Load | 0V~52.5V |
| Current - Output / Channel | 7A |
| Fault Protection | Current Limiting, Over Temperature, Short Circuit, UVLO |
| Rds On (Typ) | 110m Ω LS, 110m Ω HS |
| Switching Frequency | 500kHz |
| Motor Type | Stepper |
| Current - Peak Output | 12A |
| Load Type | Inductive |
| Height | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Thickness | 3.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8432DKD Overview
H bridge is packaged using Tube.For cost-saving purposes, H bridge is included in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.Based on 10.8V~13.2V, improved reliabilbridge drivery can be achieved.In the way of Surface Mount, H bridge circuit is mounted.In order for -40°C~150°C TJ to function normally, motor driver H bridge needs to be kept at a certain temperature.H bridge motor driver is pretty useful in a wide range of applications, including DC Motors, Stepper Motors.On PCBs, Surface Mount mounts H gate.Among full bridges specific characteristics is Status Flag.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 36 terminations.A signal interface uses 36 pins as pronged contacts.The base H bridge ic number of DRV8432 can be used to find related H bridge ics.There is a voltage supply of 50V that is used to operate H bridge circuit.Output reaches 12A at the maximum current.Output and power supply pins have a current of 14A.36 pins are work together to help this bridge driver play its specific functions.It is equipped with outputs in the form of 2.As part of the Motion Control Electronics subcategory, this H bridge motor driver has various similarities to other parts in this category.In order to maintain a high level of efficiency, the operating supply voltage is maintained at 50V.Hbridge 30V releases voltage.
DRV8432DKD Features
Available in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : DRV8432
Subcategory: 12A
Number of Receivers: 50V
DRV8432DKD Applications
There are a lot of Texas Instruments DRV8432DKD Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Automation
- High-Current DC-DC Point-of-Load Converters
- CD players
- Voltage Regulators
- Voltage Regulators for DDR memory arrays
- PC peripherals
- Small Form-Factor Voltage Regulator Modules
- High-Performance Gaming Motherboards
- High current, low profile DC-DC converters
- Bipolar stepper motor
