DRV8662RGPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Applications | Haptic Feedback |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Base Part Number | DRV8662 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 100V |
| Operating Supply Voltage | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | Analog, PWM |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 5mA |
| Output Configuration | Differential |
| Current - Output | 75mA |
| Quiescent Current | 5mA |
| Min Input Voltage | 1.4V |
| Max Input Voltage | 750mV |
| Voltage - Load | 20V~200V |
| Motor Type - AC, DC | Piezo |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 930μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8662RGPR Overview
Drivers controllers is designed with Cut Tape (CT) package.There is 20-VFQFN Exposed Pad case included with the part.The part should be mounted by Surface Mount.Fits the component connected to Haptic Feedback.There is a possibility of providing 3V~5.5Vvolts through the device.The operating temperature ranges from -40°C~150°C TJto -40°C~150°C TJ.There is a motor type Piezoassociated with this motor type.A total of 20terminations are available in the part.In this case, the voltage can be applied to the load at the rate of 20V~200V.You should run this amplifier at 3.6V.Set the part's output current to 75mA.In this device, the analog IC ANALOG CIRCUITis employed.Drivers controllers is based on the DRV8662 part number.This device is designed with a pin count of 20.There are 1 outputs available.This driver operates from a supply voltage of 5.5V.A constant voltage is maintained at 100V.This device has 1channels.
DRV8662RGPR Features
Applications : Haptic Feedback
Load voltage across the chip 20V~200V
base on DRV8662 number
designed with 1 outputs
DRV8662RGPR Applications
There are a lot of Texas Instruments DRV8662RGPR motor drivers applications.
- Matrix LED dimmers
- Dash
- Camcorders
- Architectural lighting
- General lighting
- High brightness LED lighting
- Automotive exterior and interior lighting
- Horticultural lighting
- Human-centric lighting
- Indicator circuit
