DRV8800RTYT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~38V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 32V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8800 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Operating Supply Voltage | 32V |
| Supply Voltage-Max (Vsup) | 38V |
| Power Supplies | 8/38V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 2.8A |
| Quiescent Current | 3.2mA |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 36V |
| Max Collector Current | 1.8A |
| Voltage - Load | 8V~38V |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8800RTYT Overview
This package was designed with Tape & Reel (TR)in mind.The part is packaged in a 16-WQFN Exposed Pad case.Mounting the part by Surface Mountis recommended.The component connected in General Purposematches it perfectly.The device can supply 8V~38V volts.This device operates at a temperature of -40°C~150°C TJ.Drivers controllers is possible to classify the motor type as Brushed DC.There are 16 terminations available in the part.The voltage can applied to the load at the rate of 8V~38V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 32V.Surface Mountis the recommended mounting method.Maintain a 2.8Aoutput current for the part.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.DRV8800is the part number that finds it.There are 16 pins on it.The item belongs to the Motion Control Electronics series.A total of 1outputs are available.A voltage of 32V is used as the supply voltage for this driver.Drivers controllers is possible to recognize the motor type as [0].For its operation, a supply current of 6mAis used.
DRV8800RTYT Features
Applications : General Purpose
Load voltage across the chip 8V~38V
base on DRV8800 number
designed with 1 outputs
Motor Type classified as Brushed
DRV8800RTYT Applications
There are a lot of Texas Instruments DRV8800RTYT motor drivers applications.
- Hospitality buildings
- Lighting for health and wellbeing
- Telltale lights
- Brake lights
- Automotive instrumentation
- Camera-enabled smartphones
- Side marker lights
- Hidden coves in high-end residential settings
- General lighting
- AM radio
