DRV8801PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~38V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 32V |
| Base Part Number | DRV8801 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Operating Supply Voltage | 36V |
| Supply Voltage-Max (Vsup) | 38V |
| Power Supplies | 8/38V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 6mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 2.8A |
| Quiescent Current | 3.2mA |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 36V |
| Max Collector Current | 1.8A |
| Voltage - Load | 8V~38V |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8801PWP Overview
Drivers controllers is designed with Tube package.The part is packaged in a 16-PowerTSSOP (0.173, 4.40mm Width) case.Surface Mountshould be used for mounting the part.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.Drivers controllers is capable of supplying 8V~38V volts.Regarding the operating temperature, it is in the range of -40°C~150°C TJ°C.This motor type can be categorized as Brushed DC.This part has 16termination options.There is the option of applying the voltage to the load at the rate of 8V~38V.In order to get the best performance from this amplifier, it should be run at 32V.Surface Mountis the recommended mounting method.Maintain the current output of the part at 2.8A volts.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.The DRV8801part number allows us to locate it.16pins are present on the device.Drivers controllers belongs to Motion Control Electronics series.Drivers controllers is possible to access 1outputs.Drivers controllers operates from a voltage of 36V volts.A motor type of Brushedcan be recognized.In order to operate it, 6mAsupply current is used.
DRV8801PWP Features
Applications : General Purpose
Load voltage across the chip 8V~38V
base on DRV8801 number
designed with 1 outputs
Motor Type classified as Brushed
DRV8801PWP Applications
There are a lot of Texas Instruments DRV8801PWP motor drivers applications.
- Lighting for health and wellbeing
- Dash
- Digital still cameras
- Fog lamps
- Accurate LED current matching
- Indicator circuit
- Camera-enabled smartphones
- Outdoor area lights
- Industrial high-bay lights
- Human-centric lighting
