DRV8801PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~38V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 32V |
| Base Part Number | DRV8801 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Operating Supply Voltage | 36V |
| Supply Voltage-Max (Vsup) | 38V |
| Power Supplies | 8/38V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 6mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 2.8A |
| Quiescent Current | 3.2mA |
| Logic Function | AND |
| Voltage - Load | 8V~38V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8801PWPR Overview
The package is designed with [0].Drivers controllers is packaged wDrivers controllersh a 16-PowerTSSOP (0.173, 4.40mm Width) case.In most cases, it is recommended to mount the part at Surface Mount.As a result, it is appropriate for the component connected to General Purpose.8V~38V volts can be supplied by the device.In terms of operating temperature, it falls within the range -40°C~150°C TJ.The motor type can be classified as Brushed DC.This part offers 16terminations.Voltage can be applied at a rate of 8V~38V volts to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 32V.There is Surface Mount recommended mounting method for this device.Keep the part output current at 2.8A.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.The DRV8801part number is used to locate the part.This device is designed with a pin count of 16.Drivers controllers belongs to the series [0].1outputs are available in total.There is 36V supply voltage required for this driver.This device has 2channels.
DRV8801PWPR Features
Applications : General Purpose
Load voltage across the chip 8V~38V
base on DRV8801 number
designed with 1 outputs
DRV8801PWPR Applications
There are a lot of Texas Instruments DRV8801PWPR motor drivers applications.
- LCD displays
- Dash
- Human-centric lighting
- Lighting for the ambience of tunability
- drivers for outdoor application
- Automotive exterior and interior lighting
- Infotainment backlighting
- Alternative to HID lights
- Architectural lighting
- Large format LED backlighting
