DRV8805DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 8.2V~60V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | DRV8805 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Supply Voltage-Max (Vsup) | 60V |
| Power Supplies | 8.2/60V |
| Supply Voltage-Min (Vsup) | 8.2V |
| Interface | Logic |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 1.6mA |
| Output Configuration | Low Side (4) |
| Current - Output | 800mA |
| Logic Function | AND |
| Supply Current-Max (Isup) | 2.1mA |
| Voltage - Load | 8.2V~60V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8805DW Overview
This package was designed with Tubein mind.A 20-SOIC (0.295, 7.50mm Width)case is included with the part.The part should be mounted by Surface Mount.Fits the component connected to General Purpose.A device with a voltage range of 8.2V~60V volts is available.With regard to operating temperature, it ranges -40°C~150°C TJ. Motors can be classified as Brushed DC.There are 20 terminations available in the part.Drivers controllers is possible to apply voltage at a rate of 8.2V~60Vto the load.Please take in mind that this amplifier should be run at 24V.The recommended way to mount it is Surface Mount.Maintain a 800mAoutput current for the part.The device employs the STEPPER MOTOR CONTROLLER analog IC.Using the DRV8805part number, it is located.20 pins are provided for its design.Drivers controllers is part of the series [0].The number of outputs available is [0].
DRV8805DW Features
Applications : General Purpose
Load voltage across the chip 8.2V~60V
base on DRV8805 number
designed with 4 outputs
DRV8805DW Applications
There are a lot of Texas Instruments DRV8805DW motor drivers applications.
- Dome
- PDAs
- Smart lighting applications
- Mobile phone display backlight and key light driving
- Daytime running lights (DRLs)
- Monitoring the energy that the luminaire uses
- PWM generators
- Emergency lighting
- Automotive instrumentation
- RGB and monochromatic LED drivers for signage and traffic signals
