DRV8811PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 118.501007mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Type | Integrated Circuit (IC) |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 35V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8811 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 24V |
| Max Output Current | 1.9A |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Logic |
| Nominal Supply Current | 2.5A |
| Output Configuration | Half Bridge (4) |
| Quiescent Current | 8mA |
| Collector Emitter Voltage (VCEO) | 38V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~38V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8811PWP Overview
The package is designed with [0].Drivers controllers comes in a 28-PowerTSSOP (0.173, 4.40mm Width) case.Mounting the part by Surface Mountis recommended.I believe it would be suitable for the component connected to General Purpose.There is a possibility of providing 3V~5.5Vvolts through the device.There is a temperature range of -40°C~150°C TJin which this device operates.There are 28 terminations available in the part.There is the option of applying the voltage to the load at the rate of 8V~38V.I would like to remind you that this amplifier should be operated at 35V.Using the DRV8811part number, it is located.In this device, there are 28 pins.The Motion Control Electronicsseries includes this item.Currently, there are 1 outputs available.At [0], the output voltage is maintained.Stepperrepresents the motor type.For compliance with the operation requirements, the maximum output current is [0].
DRV8811PWP Features
Applications : General Purpose
Load voltage across the chip 8V~38V
base on DRV8811 number
designed with 1 outputs
Motor Type classified as Stepper
DRV8811PWP Applications
There are a lot of Texas Instruments DRV8811PWP motor drivers applications.
- CHMSL (center high-mount stop lamps)
- Brake lights
- Emergency lighting
- Hospitality buildings
- Monitoring the energy that the luminaire uses
- drivers for outdoor application
- Indicator circuit
- Infotainment backlighting
- PDAs
- Telltale lights
