DRV8818PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 28-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Weight | 120.003531mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | DRV8818 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Max Output Current | 2.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Logic |
| Operating Supply Current | 7mA |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Supply Current-Max (Isup) | 10mA |
| Collector Emitter Voltage (VCEO) | 35V |
| Max Collector Current | 1.75A |
| Voltage - Load | 8V~35V |
| RMS Current (Irms) | 1.75A |
| Switching Frequency | 50kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Height | 1.2mm |
| Length | 9.7mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DRV8818PWP Overview
This package was designed with Tubein mind.This part is packaged with a case of [0].To mount the part by [0], it is recommended that you do so.The component connected in General Purposeis compatible with it.Drivers controllers is capable of supplying 3V~5.5V volts.This device operates at a temperature range of -40°C~150°C TJ.The part supports 28terminations.Voltage can be applied at a rate of 8V~35V volts to the load.This can be determined by looking at the DRV8818 part number.A device with 28pins is available.Drivers controllers is part of the series [0].The number of outputs available is [0].The motor type can be recognized as Stepper.For compliance with the operation requirements, the maximum output current is [0].7mAis the supply current used for its operation.
DRV8818PWP Features
Applications : General Purpose
Load voltage across the chip 8V~35V
base on DRV8818 number
designed with 2 outputs
Motor Type classified as Stepper
DRV8818PWP Applications
There are a lot of Texas Instruments DRV8818PWP motor drivers applications.
- Infotainment backlighting
- RGB and monochromatic LED drivers for signage and traffic signals
- Lighting for the ambience of tunability
- Arena lighting
- Street lights
- Automotive instrumentation
- High brightness LED lighting
- Tunnel lights
- Camera-enabled smartphones
- LCD displays
